Digital workflow
From your scan to the practice.
Send a digital impression from a scanner we accept, or an open STL or PLY file. On request, we share the 3D design (exocad) for your approval before manufacture, then finish it and send it back.
Accepted scans
The scanners and files we work from.
If your scanner is not listed, an open STL or PLY file is usually enough. Get in touch if you are unsure.
Send any of the following
How a case moves
Four steps, kept in view.
- 01
Send your scan
Digital impressions from the scanners we accept, or an open STL or PLY file, with the records the case needs.
- 02
Design approval, on request
On request, we share the 3D design (exocad) for your approval before manufacture.
- 03
We make the work
Crowns, abutments, bridges and full-arch restorations, finished and prepared for your patient.
- 04
Delivered to your practice
Finished work is sent back to the practice, ready for the appointment.
Where restorations are made
Depending on the type of work and materials, our restorations are made in the UK, Europe or other countries, including in Asia. Every case is supplied as a custom-made device under UK MHRA rules, with a statement for that case showing the country of manufacture.
Turnaround
Clear times, from complete records.
Single units and bridges
Full-arch
Times are approximate and run from receipt of complete records.
What to send
A clear checklist for each case.
Complete records help us keep to the turnaround. If something is missing, we will let you know.
On every case
- A digital impression from a scanner we accept, or an open STL or PLY file
- The opposing arch and a bite or occlusal record
- The implant system and connection, if known
- Whether the restoration should be screw- or cement-retained
- Shade, material and any design notes for the case
When the case needs it
- Analogs — supplied by the practice, or we can order them at extra cost
- Impression copings — supplied by the practice, or we can order them at extra cost
- Photographs that help the design, if you have them
- Any existing restoration or previous design the new work should follow
Questions
Questions about sending a case.
Which scanners do you accept?
3Shape TRIOS, Medit, iTero and Dentsply Sirona, or an open STL or PLY file.
Will I see the design before the work is made?
On request, we share the 3D design (exocad) for your approval before manufacture.
What do I need to send with a case?
A complete scan or open file, the opposing arch, a bite or occlusal record, the implant details if known, and your shade and design notes. Analogs and impression copings are supplied by the practice, or we can order them.
How do I send a case?
Open the dentist portal if you already have access. If you are new to the laboratory, get in touch and we will help you get set up.
Send a case
Ready when you are.
Open the dentist portal to send a case, or get in touch if you are new to the laboratory.